KTM Power Parts 69302931044 Guia De Inicio Rapido página 4

Scope of supply
1x clutch lever
1x bushing
1
2
Preparations
Remove the original clutch lever.
Remove the pin from the original clutch lever.
Assembly
Insert the original pin in the clutch lever.
NOTE:
Depending on the diameter of the fixing screw (3), the bushing (4) mounted
in the lever may need to be replaced with bushing (2) (scope of supply).
4
Mount the clutch lever with the original screw, washer, and nut.
NOTE:
3
Do not tighten the screw too tightly. The lever may seize.
Check for smooth operation. The lever must return to its original position
after activation.
4