Soundcore Spirit X2 Manual Del Usuario página 4

Pairing
True Wireless Stereo Connection
Open the charging case, the right earbud will automatically connect with the left earbud.
LED indicators (Earbuds)
Flashing white
Rapidly flashing white (Primary earbud)
Slowly flashing white (Secondary earbud)
• When powered off, press and hold the multi-function button on both earbuds for 1
second, the earbuds will enter TWS connecting mode.
• When powered on and connected, place either one of the earbuds into the charging case,
you can keep using the other one.
• When powered on and connected, if either one of the earbuds is out of battery and
powered off, you can keep using the other one.
• When you are on a call, place either one of the earbuds into the charging case and
close the charging case, 3 to 5 seconds later, the microphone in the other earbud will be
activated.
Bluetooth Pairing with your Device
1. Open the charging case and wait for 1 to 3 seconds until the LED on one of the earbuds
rapidly flashes white, the earbud enters pairing mode successfully.
2. Turn on Bluetooth on your device and click " Soundcore Spirit X2 ".
3. Wait for 3 to 5 seconds until you see a pop-up and click " Pair ". The LED on the earbud will
turn white for 1 second when Bluetooth connected.
1
2
PAIRING
Soundcore
Spirit X2
PAIRING
TWS connecting
TWS connected
3
Soundcore
Spirit X2
Bluetooth Pairing Request
"Headset" would like
to pair with your Phone
Cancel Pair
4
Pair
1"
EN 02