GYS MATIC 5/13 AIR XXL Manual De Instrucciones página 10

UNPACKING
Make sure that the packaging is intact and that no parts were damaged during transport. Check that the device is complete, in working order and
properly assembled. The faulty/damaged parts must be replaced before use.
1
7
FIXING THE RESPIRATORY SYSTEM ON THE BELT
1
Remove the belt's release buckle.
3
Make the fastening belt pass through the respiratory system's 2
5
Flip the filtration system and attach the Velcro
7
10
GYSMATIC 5/13 AIR XXL
8
5
4
2
3
6
belt loops.
Put the buckle back
The package must include :
1. The air fed welding GYSMATIC 5.13 XXL + welding hood
2. the respiratory protection system (motor + filter + waist belt)
3. lithium-ion battery
4. the air hose, its anti-fire cloth and both end fittings
5. the shoulder harness
6. the air flow tester
7. the lithium-ion battery charger
8. the carrying bag
9. 2 instruction manuals (helmet + respiratory system)
2
Remove the fastening belt from the waist connector's 2 belt loops.
4
6
on the belt.
®
8
Position the Velcro between the 2 loops.
®
Put the fastening belt back through the 2 belt loops.
Attach the harnesss to the belt's 4 plastic rings.
EN