Zyxel PL100 Guia De Inicio Rapido página 3

Connecting the PL100 to a Cable/DSL Modem and Ethernet Switch
1 1
1 2
1 Connect an Ethernet cable to the port on the PL100.
2 Connect the other end of this Ethernet cable to an available Ethernet LAN
port of your router or switch (or modem-router device).
3 Plug the PL100 into a wall socket.
4 Confirm that the
5 Install software (PL100 Configuration Utility) from the ZyXEL resource CD
(see User's Guide for detailed software installation and setup).
ENGLISH
PL100
PL-100
1 3
, and LEDs on the PL100 are on.
2