Zyxel PL100 Guia De Inicio Rapido página 4

Connecting the PL100 to a Computer
1 1
1 2
1 Connect an Ethernet cable to the port on the PL100.
2 Connect the other end of this Ethernet cable to the Ethernet port of your
computer.
3 Plug the PL100 into a wall socket that is near your computer.
4 Confirm that the
Troubleshooting
The LED is off when the PL100 is plugged into an outlet.
• Make sure the outlet is working by plugging another electric device into it. If it
is working, plug in the PL100 again. If the PL100 LED still does not light,
contact our technical support.
The LED is off and the PL100 is not detecting another Homeplug device.
ENGLISH
PL100
PL-100
1 3
, and LEDs on the PL100 are on.
3