Hot Surface Indicator - LG S47423A Instalación

Setting Surface Controls
• Cooking Element LED Bar
The range provides an LED bar for each cooking element on
the cooktop. Check messages in the display window and use
the LEDs with the corresponding control knobs to monitor
the power levels of the elements.
• Available Power Level Settings
The cooktop control's LED bar displays the element's power
level settings, ranging from Lo to Hi to Boost. Adjust the
settings in increments of one, from Lo (Level 1) to Boost
(Level 10).
• Boost Power Level
To activate the Boost mode, turn the knob directly from Off
to Boost. Boost mode is only available immediately after
activating a cooking element. When the cooking element is
set to the Boost mode, the LED bar flashes and the Boost
mode stays in operation for up to 10 minutes. After 10
minutes, the cooking element automatically returns to the Hi
setting.
HI/Boost

Hot Surface Indicator

The hot surface indicator light glows as long as any surface
cooking area is too hot to touch.
It remains on after the element is turned off and until the
surface has cooled to approximately 130 °F.
It is normal for the surface elements to cycle on and off when
cooking at lower temperature settings.
Using the Cooking Elements
Simmer
FUNCIONAMIENTO
CAUTION
Before Cooking
• Do not place or store flammable or heat-sensitive items
on the induction cooktop, even when the cooktop is not
in use.
• Place cookware on the cooking elements before turning
on the induction cooktop.
• Do not place sealed containers on the cooktop.
During Cooking
• Do not place metallic objects such as knives, forks,
spoons, and lids on the induction cooktop surface; they
can get hot.
• Use this appliance only for normal household use. It is
not designed for commercial or industrial use.
• Never use the appliance to heat the room.
• Use caution when plugging electrical appliances into
power outlets near the cooktop. Keep power cords from
any contact with the cooktop or cookware.
• Overheated fat and oil can catch fire quickly. Never
leave surface elements unattended when frying foods.
• Do not use the induction cooktop to heat aluminum foil,
products wrapped in aluminum foil , or frozen foods
packaged in aluminum cookware.
• Use caution when plugging electrical appliances into
outlets near the cooktop to keep power cords away from
the hot cooktop or cookware.
• Users with pacemakers and active heart implants must
keep their upper body at a minimum distance of 1 ft (30
cm) from active induction cooking elements. If in doubt,
consult the implant manufacturer or your doctor.
After Cooking
• After use, switch off the induction cooking element using
its control. Do not rely on the pan sensor.
29