Sony DSR-DR1000 Guia De Inicio Rapido página 2

How to power the unit off
Use the following procedure to power the unit off.
Note
Data may be lost if you power the unit off by using the POWER (main power)
switch on the rear panel or by cutting the main power source without first setting
the 1 (power) switch on the front panel to off. In this case, the unit may not
function normally when powered on again.
1
1
Press the 1 (power) switch on the front panel, turning it off.
2
Check to be sure that the audio level meters and the time counter display
section are off.
3
Set the POWER (main power) switch on the rear panel to the a side.
2
Front panel Rear panel
3