Hunter Saturn 90052 Guia De Instalacion página 12

C15
Drill a hole in the center of each outline.
C17
Attach the rails onto the screws.
C19
Connect 4" duct and vent to the outside. Tape joints.
If ducting does not fit securely, an adapter may
028_41718_EngS_1.28.08_Arial.indd 12
1/8" Bit
need to be purchased.
41718-01 01/28/2008
C16
Insert screws, leaving space between the screw head
and the joist. Screws are not provided.
C18
Tighten screws.
C20
pull wires through the strain relief.
12
1/28/08 10:47:33 AM