Hunter Saturn 90052 Guia De Instalacion página 15

Existing Construction – accessible only from below
D11
Remove an existing fan and check to make sure the
opening is large enough to accommodate the new
D13
pull wires through strain relief.
D15
Screw pre-loaded screws into joist or framing.
028_41718_EngS_1.28.08_Arial.indd 15
EXISTING FAN
motor housing (8"x 8.5").
E
41718-01 01/28/2008
D12
Move the housing into position above the ceiling.
D14
Attach existing ducting to duct connector. Tape joints.
If ducting does not fit securely,
an adapter may need to be purchased.
15
E
1/28/08 10:47:40 AM