Noise And Vibration - Flex AD 14,4 Instrucciones De Funcionamiento Originales

Noise and vibration

The noise and vibration values have been
determined in accordance with EN 60745.
AD 14.4
The A-weighted sound pressure level
of the power tool is typically:
sound pressure level 88 dB(A);
sound power level 77 dB(A);
uncertainty K = 3 dB.
Total vibration values (vector sum in three
directions) determined in accordance with
EN 60745:
Drilling in metal:
Vibration emission value a
uncertainty K = 1.5 m/s
Screwing:
Vibration emission value a
uncertainty K = 1.5 m/s
ADH 14.4
The A-weighted sound pressure level
of the power tool is typically:
sound pressure level 102 dB(A);
sound power level 91 dB(A);
uncertainty K = 3 dB.
Total vibration values (vector sum in three
directions) determined in accordance with
EN 60745:
Drilling in metal:
Vibration emission value a
uncertainty K = 1.5 m/s
Impact drilling in concrete: Vibration emission
2
value a = 13 m/s , uncertainty K = 1.5 m/s
h
Screwing:
Vibration emission value a
uncertainty K = 1.5 m/s
AID 14.4 ¼
The A-weighted sound pressure level
of the power tool is typically:
sound pressure level 99 dB(A);
sound power level 86 dB(A);
uncertainty K = 3 dB. Wear ear protection!
Total vibration values (vector sum in three
directions) determined in accordance with
EN 60745:
Screwing:
Vibration emission value a
uncertainty K = 1.5 m/s
16
2
= 2.8 m/s ,
h
2
,
2
< 2.5 m/s ,
h
2
,
2
= 2.8 m/s ,
h
2
,
2
< 2.5 m/s ,
h
2
,
2
< 2.5 m/s ,
h
2
,
AID 14.4 ½
The A-weighted sound pressure level
of the power tool is typically:
sound pressure level 100 dB(A);
sound power level 87 dB(A);
uncertainty K = 3 dB. Wear ear protection!
Total vibration values (vector sum in three
directions) determined in accordance with
EN 60745:
Screwing:
Vibration emission value a
uncertainty K = 1.5 m/s
t^okfkd>
qÜÉ=áåÇáÅ~íÉÇ=ãÉ~ëìêÉãÉåíë=êÉÑÉê=íç=åÉï=
éçïÉê=íççäëK=a~áäó=ìëÉ=Å~ìëÉë=íÜÉ=åçáëÉ=
~åÇ îáÄê~íáçå=î~äìÉë=íç=ÅÜ~åÖÉK
klqb
The vibration emission level given in this infor-
mation sheet has been measured in accor-
dance with a standardised test given
in EN 60745 and may be used to compare
one tool with another. It may be used for
a preliminary assessment of exposure.
The declared vibration emission level
represents the main applications of the tool.
However if the tool is used for different appli-
cations, with different accessories or poorly
maintained, the vibration emission may differ.
This may significantly increase the exposure
2
level over the total working period.
,
For a precise estimation of the vibration load
the times should also be considered during which
the power tool is switched off or even running, but
not actually in use. This may significantly decrease
the exposure level over the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration such as:
maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
`^rqflk>
tÉ~ê=É~ê=éêçíÉÅíáçå=~í=~=ëçìåÇ=éêÉëëìêÉ=
~ÄçîÉ UR=Ç_E^FK
AD/ADH/AID 14.4
2
< 2.5 m/s ,
h
2
,