Preparing The Load; A 612/A 846 With Flasks; A 612/A 846 With Round Flasks - Miele professional A 612 Instrucciones De Manejo

en - Areas of application
A 612/A 846 with
flasks
40

Preparing the load

The laboratory flasks rest on 4 points of the support; the neck of the
flask should not touch the water supply pipe.
The height of the frame should be adjusted so that it comes to ap-
proximately halfway up the flasks.
The rods inserted in the frame prevent the flasks from touching each
other if they are moved by the force of water during reprocessing.
2 l laboratory flasks are held securely on the support and do not
need any additional supports at the sides. Rods are therefore not re-
quired.