Technical Specifications; Noise Data; Vibration Information - Worx WG518E Manual De Instrucciones

1. HANDLE
2. ON/OFF SWITCH (VARIABLE SPEED CONTROL)
3. LOWER BLOWER TUBE
4. UPPER BLOWER TUBE
5. TUBE RELEASE BUTTON
6. FAN HOUSING
7. MOTOR HOUSING
Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL
SPECIFICATIONS
Type WG518E (5-designation of machinery,
representative of Electric Blower)
Rated voltage
Rated power
No load speed
Blower speed
Blowing capacity
Machine weight
Protection degree

NOISE DATA

A weighted sound pressure
K :
pA
A weighted sound power
Wear ear protection
Electric Blower
220-240V~50/60Hz
2500W
26500/min
97km/h-177km/h
9.1m³/min-16.7m³/min
2.8kg
/II
L : 86dB(A)
pA
3dB(A)
L :101dB(A)
wA

VIBRATION INFORMATION

Typical weighted vibration
Uncertainty
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING! The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well
maintained
Using the correct accessory for the tool and ensuring
it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING! To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate)
If the tool is to be used regularly then invest in anti
vibration accessories.
Avoid using tools in temperatures of 10
Plan your work schedule to spread any high
vibration tool use across a number of days.
a <2.5m/s
2
h
K=1.5m/s²
5
C or less
0
EN