Control Elements; Installing And Connecting The Refrigerator; Safety Instructions For Installation On Boats - Dometic CRE Serie Instrucciones De Montaje

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 77
CRE
6.2

Control elements

No. in
fig. 4, page 3
1
2
3
4
5
6
7
7
Installing and connecting the
refrigerator
7.1

Safety instructions for installation on boats

Please note the following instructions for installation on boats:
D
DANGER!
If the device is powered by the mains, ensure that the voltage supply has
a residual current circuit breaker.
A
NOTICE!
The device can be for tilted sideways up to 30° for only a short period
of time. When setting up the refrigerator, note that it must be
fastened to take account of this. If you have any questions regarding
installation, consult your specialist dealer.
Install the refrigerator so that the warm air produced can easily
escape (either upwards or to the sides, fig. 5, page 4).
The device is designed for ambient temperatures between +16 °C
and +38 °C.
EN
Explanation
IR sensor for switching the interior light
Red LED: Fault indication
LED Blue: Compressor is running
LED Orange: Compressor is off
On/off button
Inner lighting
Temperature selection button
LEDs: Temperature levels

Installing and connecting the refrigerator

19

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Cre0050Cre0065Cre0080

Tabla de contenido