Device Elements; Start Up; Operation; Transport - Kärcher T 12/1 Manual Del Usuario

Device elements

1 Fleece filter bag
2 Suction support
3 Suction hose
4 Nameplate
5 Cable hook
6 Carrying handle
7 Power cord
8 Suction head
9 Suction head lock
10 Wheel
11 Steering roller
12 Dirt receptacle
13 Main switch
14 Switch between hard surface/carpet
15 Floor nozzle
16 Suction tube
17 Mains plug holder
18 Pickup for floor nozzle
19 Lid lock
20 Cover
21 Suction force regulator (continuous)
22 Bender
23 Exhaust filter
24 Main filter basket
25 Motor protection filter
26 Grid of the motor protection filter
Colour coding
The operating elements for the cleaning
–
process are yellow.
The controls for the maintenance and
–
service are light gray.

Start up

The appliance can be operated in 2 ways:
1 Operation with fleece filter bag or paper
filter bag (option)
2 Operation without filter bag
 Check whether main filter basket has
been inserted into the appliance.
All manuals and user guides at all-guides.com
 Release and remove the suction head.
 Remove the main filter basket.
 Install the fleece filter bag or the paper
 Insert main filter basket.
 Insert and lock the suction head.
 Plug in the main plug.
 Switch on the appliance at the main
 Set the selection switch of the floor noz-
 Regulate the suction force on the suc-
 Perform the cleaning operation.
 Switch off the appliance at the main
 Pull out the mains plug.
 Empty the container.
 Vacuum and wipe the appliance inside
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
 When transporting in vehicles, secure
– 2
EN
Installation of the filter bag
filter bag (option).

Operation

Turning on the Appliance
switch.
Cleaning operations
zle to hard surface or carpet.
tion force regulator (continuous).
Turn off the appliance
switch.
After each operation
and outside with a damp cloth.

Transport

the appliance according to the guide-
lines from slipping and tipping over.
7