Device elements
1 Fleece filter bag
2 Suction support
3 Suction hose
4 Cable hook
5 Carrying handle
6 Power cord
7 Mains plug holder
8 Storage compartment for hoses
9 Impeller
10 Suction head lock
11 Suction head
12 Steering roller
13 Dirt receptacle
14 Nameplate
15 Pickup for floor nozzle
16 Socket for electric vacuum brush
17 Main switch
18 Switch between hard surface/carpet
19 Floor nozzle
20 Adjustable telescopic suction pipe
21 Upholstery nozzle
22 Heater brush
23 Crevice nozzle
24 Lid lock
25 Cover
26 Telescopic suction pipe
27 Suction force regulator (continuous)
28 Bender
29 Exhaust filter
30 Filter casing
31 Main filter basket
32 Motor filter
33 Grid of the motor proction filter
Start up
The appliance can be operated in 2 ways:
1 Operation with fleece filter bag or paper
filter bag (option)
2 Operation without filter bag
Check whether main filter basket has
been inserted into the appliance.
Installation of the filter bag
Release and remove the suction head.
Remove the main filter basket.
Install the fleece filter bag or the paper
filter bag (option).
Insert main filter basket.
Insert and lock the suction head.
Operation
Turning on the Appliance
Plug in the main plug.
Switch on the appliance at the main
switch.
Cleaning operations
Set the selection switch of the floor noz-
zle to hard surface or carpet.
Regulate the suction force on the suc-
tion force regulator (continuous).
Perform the cleaning operation.
Turn off the appliance.
Switch off the appliance at the main
switch.
Pull out the mains plug.
After each operation
Empty the container.
Vacuum and wipe the appliance inside
and outside with a damp cloth.
Transport
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport it.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Storage
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.
2
-