Operation; Use; Maintenance And Cleaning; Disposal - Vortice ARIANTE 30 Manual De Instrucciones

ENGLISH

Operation

The typical applications of the appliance are illustrated in fig. 1÷5.

Use

Unwind the electrical cord located under the unit. Insert the plug into the wall socket (Fig.6). (Check the data
plate for mains suitability.)
• Place the unit in the desired position on the floor, on a table or on any other flat support surface.
• Select the desired speed by turning knob A (Fig. 7). The speed positions are marked •, • • , •••, to indicate
speeds I , II and III.
• If desired, start the front grill rotating movement by turning knob B (Fig. 7) to position • (ON).
NOTE: When the unit is turned off by turning knob A to the 0 position (OFF), the front grill rotation will also
automatically turn off.
• When moving or transporting the unit, use the handles built into the body C (Fig.8).

Maintenance and cleaning

• Before doing any cleaning operations, remove the plug from the wall socket.
• Use a soft cloth moistened in a solution of warm water and neutral detergent. Dry very thoroughly.
NOTE: do not immerse the appliance or any of its parts in water or other liquids.
Important information
compatible disposal
IN CERTAIN EUROPEAN UNION COUNTRIES THIS PRODUCT DOES NOT FALL WITHIN THE
REQUIREMENTS OF THE NATIONAL LAWS IMPLEMENTING DIRECTIVE WEEE, AND IN THESE
COUNTRIES THE PRODUCT IS NOT SUBJECT TO SEPARATE DISPOSAL OPERATIONS AT THE END OF
ITS WORKING LIFE.
This product conforms to EU Directive2002/96/EC.
This appliance bears the symbol of the barred waste bin. This indicates that, at the end of
its useful life, it must not be disposed of as domestic waste, but must be taken to a
collection centre for waste electrical and electronic equipment, or returned to a retailer on
purchase of a replacement.
It is the user's responsibility to dispose of this appliance through the appropriate channels at the end of its
useful life. Failure to do so may incur the penalties established by laws governing waste disposal.
Proper differential collection, and the subsequent recycling, processing and environmentally compatible
disposal of waste equipment avoids unnecessary damage to the environment and possible related healthrisks,
and also promotes recycling of the materials used in the appliance.
For further information on waste collection and disposal, contact your local waste disposal service, or the shop
from which you purchased the appliance.
Manufacturers and importers fulfil their responsibilities for recycling, processing and environmentally
compatible disposal either directly or by participating in collective systems.
concerning the environmentally
7