Tips For Troubleshooting - Würth DIVA 1 Premium Traducción Del Manual De Instrucciones De Servicio Original

Malfunction
Shot is not triggered.
The shot is not triggered because the
driving pin does not "click".
Cartridges are not carried further
Piston severely distorted.
To maintain the optimum of reliability and security, we recommend to have the device inspected by a Würth
branch office or a customer service office authorized by Würth after two years at the latest.
Year and quarter of the repeated inspection is indicated on the inspection sticker.
The number in the middle indicates the year and the number pointing to the barrel indicates the
11
quarter.
If the date on the inspection sticker has run off or is missing, do not put the device in operation
anymore. In case of alterations to the device, the admission expires.
First inspection
Repeated inspection
20

Tips for troubleshooting

Remedy
Keep the device pressed against the fastening surface for 30
seconds.
Release the pressure and try again.
Check the safety device for correct functioning and try again.
Check the cartridge transport unit for correct functioning and try
again.
Renew the piston.
Repeated inspection
Inspection location Inspection Next inspection
date