Optional Items; Battery Charger; Charging The Battery - GE Baker Hughes Druck DPI 620 Genii Guía De Seguridad Y De Inicio Rápido

Chapter 1. Quick Start Guide

1.3 Optional Items

The items that follow are optional items which can be used with the Druck DPI 620G-IS:
• Pressure Module Carrier MC 620-IS: this attaches directly to the DPI 620G-IS to
allow one or two PM 620-IS pressure measurement modules to be installed.
• Pressure Module PM 620-IS and PM 620T-IS: this attaches to the pressure module
carrier (MC 620-IS) or a pressure station (PV 62X-IS) to provide pressure
measurement.
• Pressure Stations PV 62X-IS: these provide pressure generation capabilities and if
the DPI 620G-IS is installed in a pressure station, it becomes a fully integrated
pressure calibrator.

1.4 Battery Charger

3
2
1

1.4.1 Charging the Battery

1. Connect the DC power supply unit in to the +5V DC connection [1] on the side of the
battery charger cradle.
2. Insert the battery [2] into the charger cradle at a slight angle, push and click into
place. Tighten the thumb screws [3] to prevent accidental disconnection.
2 | DPI 620G-IS Safety and Quick Start Guide-English © 2016 Baker Hughes, a GE company – All rights reserved.
4