Publicidad
Idiomas disponibles
Idiomas disponibles
US
Information for use
sera flore CO
pressure diffuser
2
Please read these instructions carefully and keep for future use.
Dissolving CO
correctly and in sufficient amounts in freshwater
2
aquariums is the key to good and permanent plant growth. The ex-
clusively designed sera flore CO
pressure diffuser is made of acrylic
2
and provides excellent performance. Unlike diffusers made of glass,
the device is very stable and unbreakable when used under normal
conditions. The unit is easy to disassemble and clean entirely. An eas-
ily visible bubble counter is integrated. Therefore an additional bub-
ble counter is not required.
SAFETY PRECAUTION
The unit may only be connected to a CO
bottle behind a pressure
2
reducer with a working pressure not exceeding 2 bars (29 psi.).
Application and application range (fig. 1)
The CO
supplied under pressure is pressed through a high density
2
and fine pored fritted ceramic disc (1.1) within the pressure diffuser.
The passing fine bubbles immediately dissolve in water, thus imme-
diately supplying the CO
required for plant growth. The bubbles are
2
considerably finer and dissolve better in water than with other dif-
fusers, as the fritted ceramic disc provides especially fine pores.
Count the number of CO
bubbles directed into the pressure dif-
2
fuser per minute (1.2) for dosing the CO
.
2
11
Publicidad
