Safety In Your Working Environment; Operating Safety Tips; Operating The Machine; Starting Off - Menzer VC 790 PRO Manual Original

2.2 SAFETY IN YOUR WORKING ENVIRONMENT

Ensure that your work area is always well-lit so as to prevent accidents.
distract you while working with the vacuum cleaner.

2.3 OPERATING SAFETY TIPS

and non-slip work shoes to minimise the risk of injury.
removed from the working area of the vacuum cleaner.
parts have broken or fallen off of it.
tion nozzles.
Use the vacuum cleaner only to clean away dry dust and non-corrosive liquids.
Vacuuming up burning cigarette butts or hot ashes can cause an explosion. Do not let corrosive liquids
Wait a while after you switch off the machine before opening the machine's covering to avoid any residual
current in the coil discharging suddenly. Do not touch the metal contacts; this can cause lasting damage
to the machine.
4 EN

3. OPERATING THE MACHINE

3.1 STARTING OFF

transported:
Make sure that no power cables or hoses will get in the way of the vacuum cleaner or the sanding device.

3.2 USE IN DRY CONDITIONS

Once you have taken all necessary safety measures and the vacuum cleaner and the sanding device are
- Starting up:
Shutting down:
Auto AC:
The vacuum cleaner's motor will start automatically when you turn on the sanding device connected to it.
for 15 seconds longer and then turn itself off.
Joggle mechanism:
noise that this produces is normal and does not indicate a machine fault.
adjust it to suit the work at hand.
-
EN 5