Other Functions; Setting The Time And Date; Restoring This Product To The Default Settings; Firmware Update - Pioneer DMH-130BT Manual De Instrucciones

Menu Item Description
[Talking Volume] Hands-free phone
[TA Volume] Traffic announce
[Bluetooth Audio Bluetooth audio
Volume]
[Loudness] Compensates for deficiencies in the low-frequency and
[Off] [Low] [Mid] [High] high-frequency ranges at low volume.
[Bass Boost] Adjust the bass boost level.
[Subwoofer] Adjust each speaker cutoff frequency value.
[Front HPF] [Rear HPF]
[Subwoofer LPF]
[Beep Tone] Select off to disable the beep sound when the button is
pressed or the screen is touched.
16
En

Other functions

Setting the time and date

You can adjust the date and time from [Date & Time] in the [System Settings] menu
(page 15).

Restoring this product to the default settings

You can restore settings or recorded content to the default settings from [Restore
Settings] in the [System Settings] menu (page 15).

Firmware update

When the latest software is released on our website, you can update the software of this
unit (page 4).
CAUTION
• The USB storage device for updating must contain only the correct update file.
• Never turn this product off, disconnect the USB storage device while the firmware is being updated.
• You can only update the firmware when the vehicle is stopped and the parking brake is engaged.
1
Download the firmware update files into your computer.
2
Connect a blank (formatted) USB storage device to your computer then locate the
correct update file and copy it onto the USB storage device.
3
Connect the USB storage device to this product (page 10).
4
Follow the on-screen instructions to finish updating the firmware.
NOTES
• This product will reset automatically after the firmware update is completed if the update is
successful.
• If an error message appears on the screen, perform the above steps again.