Switching The Telephone Muting/Attenuation; Other Functions; Setting Remote Control Code Type; Using Different Entertainment Audio Displays - Pioneer AVH-P6450CD Manual De Operación

Section
Initial Settings
11
Notes
• When no subwoofer is connected to the rear
output, select
REAR SP:FULL
• When a subwoofer is connected to the rear
output, set for subwoofer
• When the rear output setting is
you cannot change the subwoofer controller.
3 Change the subwoofer controller with
2/3.
Pressing 2/3 will switch between
and
:INTERNAL
status will be displayed.
Switching the Telephone
Muting/Attenuation
When a call is made or received using a cellular
telephone connected to this product, you can
select between muting and attenuation when
using the Handsfree Telephone Unit.
1 Press 5 or ∞ to select
INIT MENU, and press
TEL/GUIDE adjustment indications are
displayed.
2 Switch the telephone muting/attenuation
with 2/3.
Pressing 2/3 will switch between
TEL/GUIDE:MUTE
(attenuation) and
and that status will be displayed.
52 En
All manuals and user guides at all-guides.com
.
REAR SP:S.W
REAR SP:S.W
S.W CTRL
and that
S.W CTRL:EXTERNAL
from the
TEL/GUIDE
.
A.MENU
(muting),
TEL/GUIDE:ATT
TEL/GUIDE:NORMAL

Other Functions

Setting remote control code type

When the remote control operation switch is set
to , changing the remote control code type
DVD
enable to operate the Pioneer DVD player by the
. supplied remote control. There are two remote
, codes, code type
When using this unit with an "XDV-P9" Multi-
DVD Player, select code
When using this unit with "SDV-P7" DVD player,
select code
signal setting of DVD player).
Set the remote control selection switch on the
left side of the remote control to appropriate
position with a pen tip or other pointed instru-
ment .
• If you selected
procedure and change the code type into the
appropriate one.
Using different entertainment
audio displays
You can enjoy displays while listening to each
sound source. The display for this MENU is the
same regardless of which source you operate
from.
Press
ENT
Each time you press
display changes in the following order:
(normal)
MOVIE SCREEN
and code type
A B
.
A
or (depending on reception
A B
mode, read the following
B
on the head unit
.
on the head unit the
ENT
— —
PICTURE 1 PICTURE 2
.