Avoiding Bad Odors; Protecting The Plastic Surfaces; Door Glasses - Beko RDNE455E30VDZX Manual Del Usuario

Ma ntenance and
6
clean ng
Service life of the product is increase if it
is regularly cleaned
B
WARNING:
before clean ng your refr gerator.
Never use any sharp and abras ve
tools, soap, household cleaners,
detergent and wax pol sh for clean ng.
D ssolve one teaspoon of carbonate
n half l ter of water. Soak a cloth w th
the solut on and wrung t thoroughly.
W pe the nter or of the appl ance w th
th s cloth and the dry thoroughly.
Make sure that no water enters the
lamp hous ng and other electr cal
tems.
Clean the door w th a damp cloth.
To remove door and body shelves,
remove all of ts contents. Remove
door shelves by mov ng them
upwards. After clean ng, sl de them
from top to bottom to nstall.
Never use clean ng agents or water
that conta n chlor ne to clean the
outer surfaces and chrom um coated
parts of the product. Chlor ne causes
corros on on such
Do not use sharp, abras ve tools,
soap, household clean ng agents,
detergents, kerosene, fuel o l,
varn sh etc. to prevent removal and
deformat on of the pr nts on the
plast c part. Use lukewarm water and
a soft cloth for clean ng and then
w pe t dry.

6.1. Avoiding bad odors

Materials that may cause odor are not
used in the production of our appliances.
However, due to inappropriate food
preserving conditions and not cleaning
the inner surface of the appliance as
required can bring forth the problem of
odor.
Refr gerator / User Manual
F rst unplug the product
metal surfaces.
Therefore, clean the refrigerator w th
carbonate d ssolved n water every 15
days.
Keep the food n closed conta ners.
M croorgan sms spread ng out from
uncovered conta ners can cause
unpleasant odours.
Never keep the food that have exp red
best before dates and spo led n the
refr gerator.
6.2. Protecting the
plastic surfaces
Clean with arm water immediately as the
oil may cause damage on the surface
when it is poured on plastic surfaces.
6.3.

Door Glasses

Remove the protective foil on the
glasses.
There is a coating on the surface of
the glasses.This coating minimizes the
stain build-up and helps to remove the
possible stains and dirt easily.Glasses
that are not protected with such a
coating may be subject to persistent
binding of air or water based organic or
inorganic dirt such as limescale, mineral
salts, unburned hydrocarbons, metal
oxides and silicones that can easily and
quickly cause stains or material damage.
Keeping the glass clean becomes too
difficult despite the regular cleaning.
Consequently, the appearance and the
transparency of the glass deteriorates.
Harsh and corrosive cleaning methods
and compounds will intensify these
defects and speed up the deterioration
process.
Water-based cleaning products that are
not alkaline and corrosive must be used
for regular cleaning purposes.
Non-alkaline and non-corrosive
materials must be used for cleaning so
35/39 EN