Dab Radio - Sandberg 133-59 Manual Del Usuario

4.1 The first time you start Presto! PVR
Select whether you want to watch digital TV or
listen to FM radio or DAB radio. Click "OK".
Follow the instructions that follow depending
on your selection:
4.2 Digital TV
1. As Device you must select "Realtek DIV Filter".
Click "Next".
2. In the "Country" menu, select the country you
are in. Alternatively, you can choose the
desired frequency range in the "Minimum
Frequency" and "Maximum Frequency" fields.
Click "Scan".
NOTE: You can select the "Smart Scan" field for
a broader scan which can give better search
results, but it takes longer.
3. Click "Finish".
The channels have now been installed and you
can watch TV.

4.3 DAB radio

1. Select your desired DAB band.
2. Select frequency range.
3. Click "Scan".
4. Click "OK".
The channels have now been installed and you
can listen to DAB radio.
4.4 FM radio
1. Select frequency range. In the top field you
can select which frequency the scan must start
in and in the "Select frequency" field select
which frequency the scan must end in.
2. Click "Finish".
The channels have now been installed and you
can listen to FM radio.
5 Presto! PVR layout
Presto! PVR consists of three windows. The top
window is for playback, the bottom is a control
window and to the right you will see the channel
index.
Control window overview
Figure 1
1. Clock
2. Scrolling program status text (program name,
recording, rewind, etc.).
3. Current TV channel.
4. Antenna signal strength.
5. Record/pause/stop/rewind/fast forward. Note
that you have the option to pause live TV,
so-called time shifting. See settings for this
in section 6.4.3.
6. Take a snapshot.
7. Show history of recorded TV programmes.
8. Volume -/+
9. Channel -/+
10. Change channel back to the last one you
watched.
11. Open/close channel index window.
12. Open programme listings. See section 7.
13. Turn subtitles on/off. NOTE! Requires support
in the TV signal for the current channel.
14. Open teletext. See section 8.
15. Select between TV, DAB radio and FM radio.
See section 4 for first-time setup of these.
16. Configuration and settings. See the following
sections.
17. Show TV image in full screen.
18. Open help for use of Presto! PVR (English).
3