Installing The Printer - Canon imagePROGRAF GP-300 Guía De Configuración

1
Removing the Packaging Material
1
Remove the packaging material.
2
Assembling the Printer Stand
3

Installing the Printer

If you are not using the stand, install the printer in a location like the following.
1
Lift up the printer.
●
For details on how to carry and the number of people, refer to
"Handling Cautions" (p. 3).
2
Remove all of the tape and other packaging material.
Remove the tape affixed to the roll holder.
Assemble the stand by referring to the Printer Stand Setup Guide (separate manual). If you are
not using the stand, proceed to "
2
Place the printer on a stable flat location.
4
3
Installing the Printer".