Epson C12C933961 Manual De Instrucciones página 2

Configuring the Platen for Zippered Wear
Remove the square part to print on media with a zipper or
other fasteners running down the middle.
Remove the platen's frame.
A
Remove the screw.
B
Remove the square part.
C
You need the screw and square part that was removed
when printing on polo shirts. Store them in a safe
place. We recommend attaching the screw to the
platen for safe storage.
When reattaching the square part, perform the steps for
removal in reverse order.
Note:
When attaching, align the protruding section with the hole
as shown in the following image.
2