Epson C12C933961 Manual De Instrucciones página 3

Before Replacing the Platen
Before attaching this product, remove the labeled round part
under the parallel adjustment plate. Make sure you have a
cross-head screwdriver and follow the steps in the User's
Guide to remove the labeled round part.
N "User's Guide" - "Removing the Labeled Round Part"
c
Important:
If this product is loaded in the printer without removing
the labeled round part, it may strike the exterior of the
printer when the movable base operates.
Platen Loading Direction
Load this product in the printer with the cutout section
facing towards you.
Loading on the Platen
This section describes only how to place media on the platen.
See the User's Guide for more information.
N "User's Guide" - "Loading on the Platen"
Fasten any buttons or zippers before proceeding. Position the
media with the collar and fastener (buttons or zipper) in the
cutout.
c
Important:
The presence of buttons or the like in the print area will
result in a decline in print quality.
Polo shirts (Square part in Place)
Front Opening-Shirts (Square part Removed)
3