Ricoh Pro L5130 Manual Del Usuario página 14

1. Safety Information for This Machine
• Some parts of this machine must be replaced with a new one periodically by service personnel.
Be sure to make a contract with your distributor or dealer for after sale service to ensure a long
life of your machine.
• Consult your sales or service representative for proper disposal of this machine. Otherwise,
commission an industrial waste disposal company.
• Unplug the power cord from the wall outlet before you move the machine. While moving the
machine, take care that the power cord is not damaged under the machine. Failing to take these
precautions could result in fire or electric shock.
• After you move the machine, use the caster fixture to fix it in place. Otherwise the machine might
move or come down to cause an injury.
• Contact your service representative if you need to lift the machine (such as when relocating it to
another floor). Do not attempt to lift the machine without the assistance of your service
representative. The machine will be damaged if it topples or is dropped, resulting in malfunction
and risk of injury to users.
• When cleaning the ink-station or the heads, or replacing the cleaning cartridge, make sure to
wear the attached goggles.
• When performing maintenance on the machine, make sure to wear the attached gloves.
Handling the machine's interior
This section explains safety precautions about handling the machine's interior.
• Do not remove any covers or screws other than those explicitly mentioned in this manual. Inside
this machine are high voltage components that are an electric shock hazard. Contact your sales
or service representative if any of the machine's internal components require maintenance,
adjustment, or repair.
• Do not attempt to disassemble or modify this machine. Doing so risks burns and electric shock.
• Some of this machine's internal components get very hot. For this reason, take care when
removing misfed and performing maintenance on the machine. Not doing so could result in
burns.
10