• When leaving the workshop after the working hours, do not leave any media on the roll holder.
If any media is left on the roll holder, it can get dusty.
• Keep ink, flushing liquid, and displacement liquid away from an open flame. Also keep the
room well ventilated when you use or handle ink, flushing liquid, and displacement liquid.
• If ink, flushing liquid, and displacement liquid get into contact with eyes, wash eyes immediately
with running water. Consult a doctor if necessary.
• If ink, flushing liquid, or displacement liquid are ingested, consult a doctor immediately with
Safety Data Sheet (SDS).
• If you inhale a lot of vapor and feel bad, immediately move to a location of fresh air and then
keep yourself warm and quiet. Then, consult a doctor as soon as possible.
• Keep ink, flushing liquid, displacement liquid, the nozzle cleaning cartridge, the waste ink bottle
and the maintenance kit out of reach of children.
• Please use protective equipment in order to avoid exposure to liquid.
• When removing jammed media or performing maintenance on the machine, avoid getting ink,
flushing liquid, and displacement liquid on your clothing. If ink, flushing liquid, and displacement
liquid come into contact with your clothing, wash the stained area with water.
• When removing jammed media, replacing media, or performing maintenance on the machine,
avoid getting ink, flushing liquid, and displacement liquid on your skin. If ink, flushing liquid, and
displacement liquid come into contact with your skin, wash the affected area thoroughly with
soap and water.
• The supplied gloves are consumables. If they are damaged or lost, use polythene gloves
instead.
Safety Information
13