Grundfos MI 202 Manual De Instrucciones página 14

Bluetooth connection
The MI 301 is paired with an Android or iOS-based smart device using the
Bluetooth connection.
Follow the instructions below to pair the devices.
Some smart devices may indicate a PIN code when
Note
connecting to the MI 301. Ignore this as no code is needed.
4.2.1 Android smart devices
1. Make sure that the Android device and the MI 301 are fully charged and
not more than one metre apart.
2. Switch on the MI 301 by pressing its power button. The indicator light will
flash every five seconds, indicating that the MI 301 is charged and ready.
3. Start the Grundfos GO app on the smart device. Press [List] or [Connect].
Bluetooth will be enabled automatically on the smart device, and it will
ask if you want to pair with the MI 301. Press [OK] to pair.
A dialog box "No Grundfos MI 301 connected" might appear
Note when pressing [List]. Wait a few seconds until the pairing
starts, and the dialog box will automatically disappear.
4. Next time the specific MI 301 device is used with the Android device, the
devices will automatically connect to each other when the app is running
and the MI 301 is switched on and is within Bluetooth range.
Alternatively, pairing can be done via the main menu. Select "Settings" >
"Remote" > "Pair with MI".
14