Signalling Communication With Remote Control - Grundfos MI 202 Manual De Instrucciones

Ocultar thumbs Ver también para MI 202:
Tabla de contenido

Publicidad

5.4 Signalling communication with remote control

The centre indicator light in the Grundfos Eye will indicate communication
with the Grundfos GO. See fig. 4, pos. 1.
Fig. 4
Grundfos Eye
The table below describes the desired function of the centre indicator light.
Case
Description
The product in question is
highlighted in the Grundfos GO
display.
Wink
To inform the user of the location of
the highlighted pump, the centre
indicator light will flash quickly.
The product in question is
selected/opened in the Grundfos GO
menu.
The product will signal "Push me" to
ask the user to select the
product/allow the product to
Push me
exchange data with the
Grundfos GO.
The indicator light will flash
continuously until a pop-up window
asks the user to press [OK] to allow
communication with the
Grundfos GO.
The indicator light is signalling that
the product is connected to
I am
Grundfos GO.
connected
The indicator light is permanently on
as long as the product is selected in
the Grundfos GO.
Signalling by the
centre indicator light
Four quick flashes
followed by a
one-second break to
signal "I am here".
Flashing continuously
with 50 % duty cycle.
Indicator light
permanently on.
27

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mi 204Mi 301

Tabla de contenido