Personal Safety; Cleaning And Maintenance - Royal Catering RCPS-16E Manual De Instrucciones

d) Only the manufacturer's service centre may make
repairs to the product. Do not attempt to make
repairs yourself!
e) In case of fire, use a powder or carbon dioxide
(CO ) fire extinguisher (one intended for use on live
2
electrical devices) to put it out.
f) Children or unauthorised persons are forbidden to
enter a work station.
g) Please keep this manual available for future reference.
If this device is passed on to a third party, the manual
must be passed on with it.
h) If this device is used together with another equipment,
the remaining instructions for use shall also be
followed.

2.3. PERSONAL SAFETY

a) Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b) The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience and/
or knowledge unless they are supervised by a person
responsible for their safety or they have received
instruction on how to operate the device.
c) The device can be handled only by physically fit
persons who are capable of handling it, properly
trained, familiar with this manual and trained within
the scope of occupational health and safety.
d) When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
e) Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
f) The device is not a toy. Children must be supervised to
ensure that they do not play with the device.
2..4. SAFE DEVICE USE
a) Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces the
risk of accidental activation.
b) When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
c) Keep the device in perfect technical condition. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of
the device. If damage is discovered, hand over the
device for repair before use.
d) Keep the device out of the reach of children.
e) Device repair or maintenance should be carried out by
qualified persons, only using original spare parts. This
will ensure safe use.
f) To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
8
g) When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country where
the device will be used.
h) Avoid situations where the device stops working
during use due to excessive loading. This may result in
overheating of the drive elements and damage to the
device.
i) Do not touch articulated parts or accessories unless
the device has been disconnected from the power
source.
j) Do not move, adjust or rotate the device in the course
of work.
k) Do not leave this appliance unattended while it is in
use.
l) Clean the device regularly to prevent stubborn grime
from accumulating.
m) The device is not a toy. Cleaning and maintenance may
not be carried out by children without supervision by
an adult person.
n) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
o) Keep the device away from sources of fire and heat.
p) Do not overload the device.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
3. USE GUIDELINES
The popcorn machine efficiently roasts corn and maintains
its temperature.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
FRONT PANEL
RCPS-16E | RCPR-16E | RCPW-16E | RCPW-16.2
RCPW-16.3 | RCPS-16.2 | RCPR-16.3 models
1
2 3
Model RCPS-BB1
1
2 3
Model RCPS-BG1
1
2 3
Model RCPS-WG1
1 2 3
Rev. 02.11.2020
RCPW-16.1 | RCPR-16.1 models
1 3
2
1. TURN – turning on the stir function
2. HEAT – turning on the bowl heating
3. POWER & LIGHT – turning on the interior light and
heating
Model RCPC 16E
1
2 3 4
1. TEMPERATURE – temperature regulator and display.
Temperature regulator:
The temperature can be set between 210°C and 250°C
(the best temperature for making popcorn is from
210°C to 230°C).
Temperature display: Shows the actual
temperature.
2. WARMING & LIGHT – turning on the showcase light
and heating
3. TURN – turning on the stir function
4. HEAT – turning on the bowl heating
5. POWER & LIGHT – turning on the interior light and
heating
3.2. PREPARING FOR USE
APPLIANCE LOCATION
The device should always be used when positioned on an
even (a 3% slant is an advantage) , stable, clean, fireproof
and dry surface, and be out of the reach of children and
persons with limited mental and sensory functions. Position
the device such that you always have access to the power
plug. The power cord connected to the appliance must be
properly grounded and correspond to the technical details
on the product label.
3.3. DEVICE USE
ATTENTION: Before usage please remove the adhesive tape
from the mixing arm which is located inside of the bowl.
OPERATION
1. In order to switch on the heating range and the light
turn on the switch (Power & Light).
2. Turn on the switch (HEAT) and pre-heat the bowl for
5-6 minutes (for the model RCPC 16E: set the desired
temperature by using the temperature regulator –
recommended temperature for popcorn preparation
is between 210 °C and 230 °C – and turn on the HEAT
switch). Put 50 ml oil (coconut oil would be best), 150
g corn and 50 g sugar into the pan.
3. Please note that during the production of popcorn,
the door needs to be closed so that the hot popcorn
cannot escape and cause burns.
4. By turning on the stir function (TURN-switch) you
can stir the popcorn until all corn is popped. Now, tip
the popcorn out of the bowl. To do that you have to
operate the lever attached to the bowl.
5. You can repeat this procedure as often as you want to.
It only takes approximately 2 minutes until the corn
pops steadily.
Rev. 02.11.2020
6. Do not let any oil drop on the hot plate as it can result
in a fire. WARNING: Do not let any water drip on the
plate during the popcorn popping procedure.
7. The device is equipped with a thermostat. If the
temperature exceeds the maximum the machine
switches off automatically to ensure the required
safety.
ATTENTION: The pot has to be emptied and the heating
turned off as soon as the frequency (approx. 2-3 seconds)
of popping slows down. Only like this, burning of sugar
and popcorn as well as damage to the coating can be
prevented. It is not always possible for all corn to pop.
Remove residues after every production cycle. We cannot
5
assume liability for damages to the pot's coating due to
improper use.

3.4. CLEANING AND MAINTENANCE

a) Always unplug the device before cleaning it.
b) Use only non-corrosive cleaners to clean the surface.
c) Use only mild, food-safe detergents to wash the
bowl
device.
d) After cleaning the device, all parts should be dried
completely before using it again.
e) Store the unit in a dry, cool place, free from moisture
and direct exposure to sunlight.
f) Do not spray the device with a water jet or submerge
it in water.
g) The device must be regularly inspected to check its
technical efficiency and spot any damage.
h) Use a soft, damp cloth for cleaning.
i) Do not use sharp and/or metal objects for cleaning
(e.g. a wire brush or a metal spatula) because they
may damage the surface material of the appliance.
DISPOSING OF USED DEVICES
Do not dispose of this device in municipal waste systems.
Hand it over to an electric and electrical device recycling
and collection point. Check the symbol on the product,
instruction manual and packaging. The plastics used to
construct the device can be recycled in accordance with
their markings. By choosing to recycle you are making
a significant contribution to the protection of our
environment. Contact local authorities for information on
your local recycling facility.
9