Sauder Palladia 415025 Instrucciones De Montaje página 12

Step 7
Turn four SILVER 5/8" FLAT HEAD SCREWS (23S) halfway
å
into the holes in the SMALL BACK (H2). Do not completely
tighten the SCREWS.
Then, slide the OUTLET (1D) onto the heads of the SCREWS
å
in the SMALL BACK (H2).
Fasten the SMALL BACK (H2) to the UPRIGHTS (C2 and D2).
å
Use four BLACK 1-7/8" FLAT HEAD SCREWS (2S).
BLACK 1-7/8" FLAT HEAD SCREW
(4 used in this step)
Page 12
SILVER 5/8" FLAT HEAD SCREW
(4 used in this step)
2S
23S
C2
D2
H2
415025
1D
H2
The OUTLET should be closer to
this edge on the other surface.
www.sauder.com/services