Sauder Palladia 415025 Instrucciones De Montaje página 26

Step 21
With a short screwdriver, fasten the CENTER DOOR (L) to one of
å
the UPRIGHTS (C2 or D2). Use the screws in the HINGES.
NOTE: You may need to loosen the mounting screw to slide
å
the HINGE slightly out of the slot. Retighten the screw before
mounting the HINGE to the UPRIGHT.
Fasten a KNOB (33K) to the DOOR (L). Use a SILVER 1/2"
å
MACHINE SCREW (38S).
Peel a BUMPER from the BUMPER CARD (29M) and stick
å
it on the corner of the DOOR (L) where it comes in
contact with the UPRIGHTS (C2 and D2) when closed.
Mounting
Page 26
screw
slot
C2
D2
L
29M
L
33K
29M
CENTER DOOR OPENING
TO THE RIGHT
33K
415025
CENTER DOOR
OPENING TO THE LEFT
D2
C2
38S
SILVER 1/2" MACHINE SCREW
(1 used for the KNOB)
www.sauder.com/services