Sauder Palladia 415025 Instrucciones De Montaje página 24

Step 19 Step
Carefully stand your unit upright.
å
With a hammer, gently tap four SHELF SNAPS (7R) into
å
the CENTER SHELF (G).
Slide the END MOLDING (DD)* onto the notched edge of
å
the CENTER SHELF (G).
Insert four METAL PINS (1R) into the holes in the
å
UPRIGHTS (C2 and D2). Set the CENTER SHELF (G) onto
the METAL PINS so the SHELF SNAPS are resting on the
METAL PINS. Push on the SHELF until each METAL
PIN "snaps" into the SHELF SNAPS.
*U.S. Patent No. 5,499,886
å
Page 24
Notched edge
These edges
should be even.
DD
1R
(4 used)
G
C2
D2
415025
Pro Tip: Lift with your
legs. And, you know,
your arms.
7R
G
7R
www.sauder.com/services