Sauder Palladia 415025 Instrucciones De Montaje página 30

Step 25
Refer to the enlarged diagram to identify the parts on the HINGES.
å
The DOORS may need some adjustments. Follow the text below to
å
make needed adjustments.
DOOR ADJUSTMENTS:
å
To adjust the DOORS from side to side (horizontal), turn the
å
adjusting screw in or out.
To adjust the DOORS up and down (vertical), loosen both vertical
å
adjustment screws. Move the DOORS up or down to the desired
location. Tighten the screws after making adjustments.
To adjust the DOORS in or out (depth), loosen the mounting screw
å
one turn and move the DOORS in or out, as needed. Tighten the
mounting screw after making adjustments.
Page 30
Adjusting screw (horizontal)
415025
Almost time to
celebrate! With a nap.
Mounting screw (depth)
(vertical adjustment)
www.sauder.com/services