Tabla de contenido
Publicidad
Store station (fig. 9)
Short press (1 s) the Menu button [M] three times, voice
message "Store station". Short press (1 s) the [ + ] or [–] button
to select position. Long press (2 s) the Menu button [M] to
store the station. A voice message will confirm "Confirmed".
Preset station (fig. 10)
Short press (1 s) the Menu button [M] two times to enter the
preset station mode. A voice message will confirm "Preset
station". Short press (1 s) the [ + ] or [–] button to browse and
select preset station. The radio station frequency will be
confirmed by a voice message.
3M™ CONNECTED EQUIPMENT, Mobile application **
Connect your "WS™ ALERT™ XPI Headset" with the "3M™
Connected Equipment" mobile application supporting both
Android and iOS. When connected to the mobile application
you will have access to settings, configurations, user
instruction etc.
NOTE: For more information go to the "App Store" or "Google
Play" and download the "3M™ Connected Equipment"
application. For support on the 3M™ Connected Equipment",
please see information in the mobile application.
Bluetooth
Multipoint technology **
®
This headset supports Bluetooth
Bluetooth
Multipoint technology to connect your headset to
®
two Bluetooth
devices at the same time. Depending on the
®
type of Bluetooth
devices connected and their current
®
activities, the headset controls the Bluetooth
different ways. The headset prioritizes and coordinates
activities from the connected Bluetooth
Pairing a Bluetooth
device (fig. 2, fig. 5)
®
The first time the headset is powered on, it automatically
enters pairing mode. A voice message confirms, "Bluetooth
pairing on". Pairing mode can also be entered from the menu.
This is necessary for pairing a second device (fig. 6).
See "Configuring your headset".
Make sure that Bluetooth
communication is activated on
®
your Bluetooth
device. Search and select "WS ALERT XP"
®
or "WS ALERT XPI" on your Bluetooth
message confirms when the pairing is complete, "Pairing
complete" and "Connected".
NOTE: You can always stop the pairing process by a long
press (2 s) on the Bluetooth
®
NOTE: Only one of the two paired devices can be a two-way
radio. ** The headset only supports two-way radio with
3M™ PELTOR™ Push-To-Talk protocol. If you have any
questions, please contact your local distributor.
NOTE: When a 3rd Bluetooth
®
of the previous paired devices is removed from the headset. If
one of the devices is connected, the unconnected device is
removed. Otherwise, the 1st paired device is removed. **
Multipoint technology. Use
®
devices in
®
devices.
®
device. A voice
®
button [
] (fig. 7).
device is successfully paired, one
** 3M™ PELTOR™ WS™ ALERT™ XPI Headset
RECONNECTING BLUETOOTH
When the headset is powered on, it tries to reconnect to all
paired devices during 5 minutes. A voice message will confirm
the connection "Connected".
NOTE: If the link is lost, the headset will try to reconnect
during 30 seconds. A voice message will inform you if you get
link loss, "Disconnect".
Connected and operating one phone.
Connected and operating two phones. ** (see fig. 7)
Bluetooth
®
button
No activity
Streaming
Incoming call
Outgoing call/Call
in progress
Short press
Call in progress
on one phone,
incoming call on
second phone **
No activity/
Streaming
Incoming call
Long press
Call in progress
Call in progress
®
on one phone,
incoming call on
second phone **
Connected to two-way radio.
Connected to two-way radio and phone. **
Operating two-way radio. (see fig. 7)
Bluetooth
®
button
No activity/
Press
Streaming
Transmitting on
Release
two-way radio
DEVICES
®
State
Action
Voice control Play **
Voice control Pause **
Answer
End call
End ongoing call,
answer incoming
call **
Call the last dialed
number
Voice control on the
last paired device **
Reject
Toggle call between
phone/headset
Reject incoming call
State
Action
Start transmitting on
two-way radio
Stop transmitting on
two-way radio
EN
4
Publicidad
Tabla de contenido
