Before Use; Product Assembly - cecotec Rock&Water 3000 Twin Manual De Instrucciones

3. BEFORE USE

1. Take the product out of the box.
2. Remove all packaging materials and promotional labels or stickers from the heating plate
and tray.
3. Unplug the device.
4. Clean the cooking surfaces using water and soap, then rinse and dry thoroughly.
5. Make sure the inlet connector on the plate is fully dry.
NOTE: A slight odour and smoke might appear when heating the device for the first time, due to
the non-stick coating.
4. INSTALLATION
1. Place the device on a flat, stable and dry surface.
2. Introduce the metal oil-drip tray.
3. Fix the heating plate in the griddle's main body.
4. The grill's socket must be on the same side as the safety interlock.
WARNING: Do not use the appliance if it is not properly installed following the diagram shown on
the PARTS AND COMPONENTS section.
03004_Rock&Water Reversible_Manual_DS.indd 13
ENGLISH
ROCK&WATER 3000 TWIN 13
7/6/18 11:58