ENGLISH
3. BEFORE USE
•
Take the product out of the box.
•
Remove all packaging materials. Keep the original box.
•
Make sure all the components are included and in good conditions, otherwise, contact
immediately the officia Technical Support Service of Cecotec.
•
Clean the plates with a soft, dampened cloth.
•
Dry thoroughly all parts of the device with a cloth or paper towel.
•
For best results, lightly coat the cooking plates with a little cooking oil or cooking spray.
WARNING: A slight odour and smoke might appear when heating the device for the first time.
This is due to manufacturing materials residues and does not affect the appliance's operating.
4. OPERATION
1.
Connect the product's plug to a power supply. The product will beep and all the lights will
flash on e. The power switch light will flash on e.
2.
Press the power button, the product will beep. The product will begin to warm up and the
display will light up accordingly as it reaches optimum operating temperature (220 ºC).
This heating process will take about 5 minutes.
3.
When the warm up is completed, the product will beep 3 times. The power light will
switch off and the START light will light up.
4.
Put the food inside the grill and select the desired program or set the desired temperature
manually. Once the cooking process has begun, the different levels of cooking will light
up accordingly.
5.
The display screen will show the minute countdown left for the food to be cooked (only
when a program is selected).
6.
When food is cooked, the product will beep 3 times and stop heating. The power light
will flash continuously, the rest of the lights will stop operating (only when a program is
selected).
7.
Use the handle to open the grill and use a heatproof spatula to remove food.
8.
Once you have finished cooking, disconnect the plug from the wall outlet and leave the
unit open until it cools down.
WARNING: Never use metal tongs or a knife to remove food as these can cause damage to the
non-stick coating.
30
ROCK'NGRILL SMART
03067_Rock'nGrill Smart_Manual.indd 30
30/9/19 9:04