Introduction; Product Features; Use; Charging Your Mini Prep Pro - Cuisinart MINI PREP PRO SANS FIL Manual Del Usuario

2. INTRODUCTION

Congratulations on your purchase of the Cuisinart Cordless Mini Prep Pro!
For over 30 years Cuisinart's aim has been to produce the very finest kitchen equipment. All
Cuisinart products are engineered for exceptionally long life, and designed to be easy to use as
well as to give excellent performance day after day.
To learn more about our products and for recipe ideas, visit our website www.cuisinart.eu

3. PRODUCT FEATURES

(refer to cover)
1. Lid
2. Work bowl with handle
3. Blade with BladeLock system
4. Control switches
5. Base Unit
6. Charging port (not shown)
7. USB lead and adaptator

4. USE

Before use
A. CHARGING YOUR CORDLESS MINI PREP PRO
The batteries in your Cordless Mini Prep Pro have not been fully charged. Before using, the batteries
must be charged until all three blue lights are illuminated. With a full charge, your Cordless Mini
Prep Pro will run for approximately 15 minutes, depending on your recipe. Your Cordless Mini Prep
Pro will be fully charged in approximately 2 hours.
N.B. To charge the product, insert the micro USB end, of charging lead, into the charging port at
the back of the main unit. Plug the USB end directly into the adapter plug and then into a mains
supply outlet.
Battery Life Indicator Lights
The indicator lights will flash blue when the battery is being charged. When all three lights are
illuminated, this means the battery is fully charged and is then ready to use. As the battery starts
to run down, the indicator lights will turn off. The battery will need to be recharged when the last
indicator light is flashing. If the battery has completely run down on the unit, it will not operate.
B. FITTING AND REMOVING THE PARTS
• Place the housing base on a flat, dry stable surface.
• Place the work bowl over the motor base, with the handle facing forward and positioned slightly
to the left of the control panel (the bowl will slot onto the base).
• Turn the bowl in an clockwise direction until it locks into position on the housing base.
20