Cable Extension; Preparation Of The Appliance; Handling The Packed Appliance; How To Unpack The Appliance - Fimap FV13.1 + HEPA Manual De Uso Y Mantenimiento

CAUTION:
Only use accessories and spare parts that have been authorised by the manufacturer. Original accessories and
spare parts ensure the appliance can be used safely and without any fault.
CAUTION:
CABLE SECTION
CABLE LENGTH
<16A
Up to 20m 1.5mm
From 20m to 50m 2.5mm
DANGER:
The appliance has been designed only for vacuuming dry solid material and it should not be used for other
purposes.
WARNING:
The appliance is not suitable for vacuuming powders that are damaging to health.
Since the packaging elements (plastic bags, staples, etc.) are a
potential source of danger, they should not be left within the reach
of children, disabled persons, etc. The gross weight of the appliance,
including packaging, is 13 kg.
The dimensions of the package are as follows (Fig.1):
The procedure for removing the device from its packaging is the
following:
1. Open the outer box.
2. Remove the accessories from the box and carefully lay them on
the ground.
3. Take out the vacuum head carton.
4. Take out the appliance from the box using the handle (1) (Fig.2),
being careful not to damage either during the operation.
5. Take out the appliance from the protective bag using the relative
The procedure for the safe handling of the device is the following:
1. Take all necessary steps to ensure that the device is in a safe
condition (see "MACHINE SAFETY
2. Remove the vacuum hose (1) from the vacuum nozzle (2) on the
collection tank, before pulling the vacuum hose press the button
(3) for unlocking the catch (Fig.3).
3. Insert the appliance into the protective bag, taking care not to
damage either during this operation.
4. Insert the appliance into the carton, taking care not to damage
either during this operation.
Remember to place at the bottom of the carton the block for the
wheels of the appliance, position around the collection tank the
blocks for preventing damage during transportation.
5. Insert the accessories support and the head block inside the
ACCESSORIES AND SPARE PARTS

CABLE EXTENSION

Only use the materials expressly recommended by the manufacturer
as cable extensions (contact an authorised retailer) or else high quality
<25A
models. When using an extension, respect its minimum cross-section.
2.5mm
2 2
4.0mm
2 2
DRY VACUUM CLEANER

PREPARATION OF THE APPLIANCE

HANDLING THE PACKED APPLIANCE

HOW TO UNPACK THE APPLIANCE

HOW TO TRANSPORT THE APPLIANCE

").
23
A: 400 mm
B: 420 mm
C: 540 mm
handle, taking care not to damage either.
ATTENTION: it is recommended that all the packaging
components be kept for any future transportation of the
appliance.
ATTENTION: Users are advised to always wear protective
gloves, to avoid the risk of serious injury to hands.
carton.
6. Place the accessories in the carton.
7. Close the carton.
ATTENTION: When transporting the appliance on vehicles,
secure it according to the directives in force so that it cannot
slide or tip over.
ATTENTION: Users are advised to always wear protective
gloves, to avoid the risk of serious injury to hands.