User Instructions - Danfoss TP4000 Instrucciones De Instalación

User Instructions

GB
Your programmable room thermostat
The TP000 allows you to programme up to 6 times and temperatures
at which your heating will come on and go off each day.
It features several user overrides including frost protection, thermostat
mode and time or temperature display.
Preset Programmes
Your TP000 comes ready programmed with a set of operating times
and temperatures which often suit most people.
If you want to change any of these settings you can do so by following
the instructions on pages 8-9.
First, follow the steps on page 7 to set the correct time and date.
Before you start
Open the flap on the front of the programmer and
press the RESET button with a non-metallic object
until the display goes blank. This will ensure that
the factory programmes are set and that the micro-
computer in the product is operating correctly.
6
Event Time
1 06:0
 08:0
 11:0
 1:0
5 16:0
6 :0
Temp °C
0
15
0
15
1
15
RESET