To temporarily alter the current programmed temperature
∙
Press Λ or V until required temperature is
displayed.
(This override will automatically cancel at
beginning of next programmed event).
Frost Protection and Thermostat Mode
A constant temperature between 5°C-30°C
can be selected if desired, for example, for frost
protection.
∙
Press Λ and V together.
∙
Use Λ or V buttons to set the desired low
temperature.
- At 5°C a snowflake symbol appears
indicating frost protection mode.
- At all other temperatures the snowflake
symbol is turned off.
∙
To return to automatic programming press
Λ and V together again.
GB
9