Discs; Using The Fm/Am Radio - Panasonic SC-PM5 Instrucciones De Funcionamiento

Discs

Basic play Basic play
1
Press [y] to turn the unit on.
2
Press [0, OPEN/CLOSE] to open the disc tray and then
load the disc. Press [0, OPEN/CLOSE] again to close.
3
Press [6, CD] or [OK] to start play.
4
Adjust the volume.
Stop playback
Press [7] (stop).
Pause play
Press [6, CD].
Press again to resume play.
Skip tracks
Press [4/1] or [¡/¢].
During RANDOM or 1-ALBUM RANDOM
play, you cannot skip to tracks that have been
played.
During RANDOM play, you can search
backward or forward only within the current
track. (➡ see "Play Mode function")
Search through
CD
tracks
Press and hold [4/1] or [¡/¢] during
play or pause.
Skip album
MP3
Press [5 / ∞, ALBUM] in the play mode.
Press [5 / ∞, ALBUM] once and then the
numeric buttons in the stop mode.
Play Mode function Play Mode function
CD MP3
Press [PLAY MODE] to select the desired mode.
1-TRACK
Plays one selected track on the disc.
1TR
Press the numeric buttons to select the track.
1-ALBUM
MP3
1ALBUM
Plays one selected album on the disc.
Press [5 / ∞, ALBUM] to select the album.
RANDOM
Plays a disc randomly.
RND
1-ALBUM
MP3
RANDOM
Plays all tracks in one selected album
1ALBUM RND
randomly.
Press [5 / ∞, ALBUM] to select the album.
RQTX0185-2M_leus.indd 15 RQTX0185-2M_leus.indd 15

Using the FM/AM radio

Manual tuning Manual tuning
1
Press [FM/AM] to select "FM" or "AM".
2
Press [TUNE MODE] to select "MANUAL".
3
Press [4/1] or [¡/¢] to select the frequency of the
required station.
T
o tune automatically
Press [4/1] or [¡/¢] for a moment until the frequency starts
changing rapidly. The unit begins auto tuning, stopping when it fi nds
a station.
• Auto tuning may not function when there is excessive interference.
• To cancel auto tuning, press [4/1] or [¡/¢] once again.
Memory preset Memory preset
30 FM and 15 AM stations can be preset.
Preparation
Press [FM/AM] to select "FM" or "AM".
Automatic presetting Automatic presetting
1
Press [PLAY MODE] repeatedly to select either "CURRENT"
or "LOWEST".
CURRENT Tuning begins from the current frequency.
LOWEST Tuning begins from the lowest frequency.
2
Press [AUTO PRESET] to start presetting.
The tuner presets all the stations it can receive into the channels in
ascending order. When fi nished, the last station memorised is tuned
in.
Manual presetting Manual presetting
1
Press [TUNE MODE] to select "MANUAL".
2
Press [4/1] or [¡/¢] to tune to the required station.
3
Press [PROGRAM].
4
Press the numeric buttons to select a channel.
The station occupying a channel is erased if another station is
preset in that channel.
5
Repeat steps 2 to 4 to preset more stations.
Selecting a preset station Selecting a preset station
Press the numeric buttons to select the channel.
For channels 10 to 30 press [h10], then the two digits.
15
5/18/10 4:39:45 PM 5/18/10 4:39:45 PM