BaByliss PRO VOLARE X2 maxlife pro Manual Del Usuario página 12

2. Fit the mounting tab into the blade tongue on the clipper and
push in until it clicks.
CLIPPER CARE
Cleaning the Blade
1. Brush off any hairs from the clipper and from around the blade.
2. Remove the blade and brush off hairs from the blade edge.
3. Brush the hairs out from between the fixed comb blade and the moving cutter
blade while pressing down on the cleaning lever to raise the moving cutter blade.
Note: Do not attempt to take the blade apart or you will not be able to use it again.
Lubrication
1. Apply a few drops of the oil to the space between the fixed comb blade and mo-
ving cutter blade. Apply the oil to the clipper before and after each use.
VERY IMPORTANT
Blades must be cleaned and oiled on a regular basis so they will function pro-
perly. Failure to regularly clean and oil the blades will void the warranty.
2. Set the taper control to 2.0 and then remount the blade on the clipper.
12