What If There Are Problems; Technical Data; Guarantee / Service - Beurer FWM 45 Manual De Instrucciones

8. What if there are problems?

Problem
The foot warmer does not warm up or the massage
function cannot be activated while:
– the mains adapter is connected to a working socket.
– the foot warmer control is connected to the mains
adapter cable.
– both sliding switches are set to setting 2 (heat +
massage).

9. Technical data

Foot warmer technical data: See type plate on the foot warmer control.
For technical data about the mains adapter, see the type plate label on the mains adapter.
Permissible mains adapter:
EU mains plug: IVP1200-1500G
UK mains plug: IVP1200-2000B
Model identifier
Input voltage
Input frequency
Output voltage
Output current
Output power
Average efficiency during operation
Efficiency load
load power consumption

10. Guarantee / Service

Further information on the guarantee and guarantee conditions can be found in the guarantee leaflet supplied.
Cause
The foot warmer is
faulty.
IVP1200-2000B
(UK mains plug)
100 V – 240 V
50/60 Hz
12.0 V
2.0 A
24.0 W
86.5%
84.8%
0.09 W
15
Solution
Send the foot warmer
for servicing.