Cleaning And Maintenance; What If There Are Problems; Disposal; Technical Specifications - Beurer MG 100 Instrucciones Para El Uso

Aparato de masaje de infrarrojos con percusión
Ocultar thumbs Ver también para MG 100:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
After using for a maximum of 20 minutes, unplug the device and let it cool down. Keep the device dry.
Note
• Do not use the massage device just before going to bed. The massage can also have a stimulating effect
and may cause difficulties in getting off to sleep.
• The device has an automatic shut-off mechanism set to a maximum operating period of 20 minutes.
WARNING
• The massage must be pleasant and relaxing at all times. Stop the massage or change the position of the
massage device if you find it is painful or unpleasant.
• Do not jam or force any part of your body, in particular your fingers, into the area of the massage head.

8. Cleaning and maintenance

Cleaning
To clean the unplugged and cooled device, wipe with a slightly damp microfibre cloth. Then you can clean it with a
cloth which is no more than lightly moistened. You can also use a mild detergent.
WARNING
• Disconnect the device before cleaning it.
• Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the device or
accessories.
• Do not use the device again until it is completely dry.
Storage
Keep the massage device in a cool and dry place where it is out of the reach of children. We recommend storing
the device in its original packaging.

9. What if there are problems?

Problem
Massage head does
not move.

10. Disposal

CAUTION
For environmental reasons, do not dispose of the device in the household waste at the end of its
useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the device
in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have
any questions, please contact the local authorities responsible for waste disposal.

11. Technical specifications

Disposal
Dimensions
Weight
Cause
Appliance not connected
to the power supply.
Device is not does not move. Switch on the appliance.
Overheating protection
tripped.
220-240 V; 50 Hz; 20 W
45 x 16 x 14 cm
ca. 1,74 kg
Remedy
Connect the plug to the mains supply and
switch on the appliance.
Disconnect device from mains power, wait at
least 15 minutes, plug in again and switch on.
13

Publicidad

Tabla de contenido
loading

Tabla de contenido