KTM Power Parts 60112020000 Instrucciones De Montaje página 6

2
1
4
6
8
8
10
9
10
12
6
3
7
5
11
13
5
14
Scope of delivery:
1x rack, left (1)
1x rack, right (2)
1x fixing plate, long (3)
1x fixing plate, short (4)
4x allen head screws M8x20
4x washers A 8.4
2x fixing plates (5)
2x countersunk screws M8x70
2x spacers 13x8.4x10
1x cross connector 1 (6)
2x countersunk screws M8x80
2x countersunk screws M8x60
2x form washers (original top case plate)
2x form parts (original top case plate)
2x spacers ø20x8.4x9 (PP top case back plate)
2x spacers ø20x8.4x13 (PP top case back plate)
1x cross connector 2 (7)
2x hex screws M6x20
2x washers A6.4
2x self-locking M6 nuts
8x quick releases with spring washers
8x lock rings
Max. load 10 kg per bag.
Maximum speed with mounted bags 160 km/h
- Remove the left and right rubber plugs (8) (if present).
- Remove the screws (9) and (10) and take off the top case plate (11).
- Remove the left and right screws (12) and take off both racks.
NOTE:
Grease the M8x70 countersunk screws on the left (13) and right (included)
with copper paste.
- Insert the fixing plate (5) on the left and right into the rack with the M8x70
countersunk screw (13) (included) and the 13x8.4x10 spacer (14) (inclu-
ded).