Flow Diagram; Installation Instructions - Hansgrohe PuraVida 15432000 Modo De Empleo/Instrucciones De Montaje


Safety Notes
Gloves should be worn during installation to prevent

crushing and cutting injuries.
The shower system may only be used for bathing,

hygienic and body cleansing purposes.
The hot and cold supplies must be of equal pres-

sures.
Do not allow the streams of the shower touch sensi-

tive body parts (such as your eyes). An adequate
distance must be kept between the shower and you.
The product may not be used as a holding handle. A

separate handle must be installed.

Installation Instructions

The fitting must be installed, flushed and tested after the
valid norms.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
anti-pollution function
4
English
Symbol description
max. 1 MPa
0,1 – 0,5 MPa
1,6 MPa
max. 80°C
65°C
Assembly see page 31
Do not use silicone containing acetic acid!
Dimensions (see page 35)

Flow diagram

(see page 35)

Hand shower

Bath Spout
Operation (see page 36)
Hot water limiter
(see page 37)
To adjust the hot water limiter on single lever
mixers, please see page 37. No adjustment
is necessary when using a continuous flow
water heater.
Maintenance non return valve
(see page 38)
The non return valves must be checked
regularly according to DIN EN 1717 in
accordance with national or regional regula-
tions (at least once a year).
Maintenance Secuflex hose (see
page 38)
Repeat cleaning when pull out becomes
difficult.
Cleaning (see page 40)
and enclosed brochure
Spare parts (see page 41)