Bestway HYDRO-FORCE Freesoul Tech Manual Del Usuario página 2

Oar Installation(65302; 65303; #65310)
Adjust the oar length according to your height.
Take your height and add 8" for surfing length and 10" for touring length.
Deflation
Maintenance:
1. Inflate according to the PSI marked besides the valve;
2. To avoid the long-time exposure to sunshine or rain, put the outside cover on top for protection when it not being
used;
3. Clean it with mild soap water and soft cloth in case it is not going to be used for a long time. Dry it before putting
them away. Store it at a dry and shady place and keep it out of reach of Children.
A
NO PROTECTION AGAINST DROWNING
1
A WARNING
PROHIBITION
B
C MANDATORY
NO PROTECTION AGAINST DROWNING
1
NOT FOR CHILDREN 14 YEARS OF AGE AND BELOW; APPLY ONLY TO CHILDREN ABOVE 14 YEARS OF AGE
2
FULLY INFLATE ALL AIR CHAMBERS
3
DO NOT USE IN WHITE WATER
4
DO NOT USE IN BRAKING WAVES
5
DO NOT USE IN OFFSHORE WIND
6
DO NOT USE IN OFFSHORE CURRENT
7
READ INSTRUCTIONS FIRST
8
NUMBER OF USERS, 1 ADULT
9
SWIMMERS ONLY
10
MAXIMUM LOAD CAPACITY 65302: 110KG; 65305/65306: 120KG; 65303: 130KG; 65308/65312: 140KG; 65310: 160KG
11
SAFE DISTANCE TO SHORE 150 M
12
ALWAYS SUPERVISE CHILDREN IN WATER
13
MAX
MAX
Easily adjust the length
14
0
B
2
100 %
3 4
5 6
Storage
1. Deflate the board by unscrewing the cap of air valve, press the spring valve and turn clockwise.
2. Remove all the accessories from the board. Use a cloth to gently dry all surfaces. Keep the board and all
accessories clean and dry.
3. Fold the board from front to back to remove additional air.
4. Store in a cool, dry place and out of children's reach.
NOTE: Do not unfold this product when the temperature is low, leave the product in the room
temperature (over 20ºC) for 24 hours before inflation.
Repair
• Fully clean the area to be repaired.
• Cut the correct size from the repair patch material.
• Apply only the amount of glue (not included) needed to cover the repair site.
C
SWIMMERS ONLY
10
7 13
2
1 0
8 9
150m
max.
... kg
11 12